How To Increase The Load-bearing Performance Of Non-woven Fabric Bags?

Non woven fabric bags are becoming more and more widely used in many situations, so we need to consider the load-bearing performance of non woven fabric bags. A typical non-woven bag can withstand a weight of around 10kg. If you want to use a non-woven bag to withstand a larger weight, what should be done? The manufacturer believes that the following points can be improved to greatly increase the load-bearing performance of non-woven bags.

1、 Try to use sewn non-woven fabric bags as much as possible

The load-bearing performance of sewn non-woven fabric bags is much stronger than that of ultrasonic hot melt non-woven fabric bags. Due to the fact that hot melt non-woven fabric bags only heat bond non-woven fabrics together through high temperatures, all forces will be borne at a hot melting point, so the load-bearing capacity of hot melt non-woven fabric bags is not strong.

2、 Cross at the handle of the non-woven bag

The vast majority of the force on the non-woven bag during movement will be borne by the four points on the hand of the non-woven bag. If the load-bearing performance of these four points is not easy to tear, the load-bearing performance will be greatly enhanced. Therefore, it is very useful for us to make a fork in the hand to improve the load-bearing performance of the non-woven bag.

3、 The bottom or entire circle of the portable car

As mentioned above, all the center of gravity of ordinary non-woven bags during movement will bear weight at the four points on the hand. If we move the cart to the bottom of the bag or wrap it around the bag, the area of the load-bearing center of gravity of the non-woven bag will increase many times, and the center of gravity will not be solely supported by the four points on the hand. The entire front and back of the bag will share the center of gravity, greatly enhancing its load-bearing performance. I have conducted an experiment once. The 40 * 40 * 20 non-woven fabric bag is wrapped around the entire non-woven fabric bag by hand, and a 30kg brick is loaded into the bag. The non-woven fabric bag is not affected by tension during normal pedestrian speed movement, and is not torn or broken.